Optical Fiber Cable

Home >> Optical Fiber Cable

Optical Fiber Cable Manufacturer

Optical Fiber Cable

Capitalizing on the ability of our skilled personnel, we are keenly instrumental in delivering a comprehensive array of Optical Fiber Cable Manufacturer. It is manufactured using superior quality materials in accordance to the set industry norms. This cable is well known in the market due to its better reliability, thinner and sturdier. We are known as Optical Fiber Cable Manufacturer. Moreover, Optical Fiber Cable can be bought from us at pocket friendly prices. 

Optical Fiber Cable, also known as an optical-fiber cable, is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light. The Optical Fiber Cables are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed.

Fiber Optic Cable Single Mode & Multi Mode

Fiber Optic – Central Tube Glass Yarn/Steel Wire Armored/Single PE Jacket

Cable Characteristics-

DESCRIPTION:
2 – 48 optical fibers, Central gel filling loose tubes, Flexible non-metallic strength member – glass yarn, two rip cords, CSTA armor, Two Steel Wires Embedded in Single PE jacket (black).

PHYSICAL CHARACTERISTICS

 Fiber Type125/250 μm
Number of Fibers12
Fiber Color Code Chart: 
NumberColor
1Blue
2Orange
3Green
4Brown
5Slate
6Natural
Buffer Tube MaterialPBT – Polybutylene Terephthalate
Buffer Tube Filling MaterialSynthetic Thixotropic Gel

STRENGTH MEMBER:

 Strength Member MaterialGlass yarn, Two Steel Wire Embedded in Sheath

ARMORING:

 Armor TypeCorrugated
Armor MaterialSteel Tape

OUTER JACKET:

 Outer Jacket MaterialPE – Polyethylene
Outer Jacket ColorBlack

OVERALL DIAMETER:

 Overall Nominal Diameter8.7 mm

MECHNICAL CHARACTERISTICS

 Temperature Range– 40℃ To + 70℃
Bulk Cable Weight85 kg/km
Max. Tensile Force2000 N
Max. Crush Resistance for 60 seconds1000 N/100mm, Passes IEC60794-1
Min. Bend Radius20 × Cable OD

APPLICABLE SPECIFICATION AGENCY COMPLIANCE

APPLICABLE STANDARDS

 SpecificationIEC 60794-1,
RoHS Compliant (Y/N)Y (for outer jacket only)

SUITABILITY

 Suitability – Indoor (Y/N)Y
Suitability – Outdoor (Y/N)Y (where waterproof is not strictly required.)
Suitability – Aerial (Y/N)Y
Suitability – Duct (Y/N)N
Suitability – Direct Burial (Y/N)N
Sunlight Resistance (Y/N)Y

Optical Characteristics

SINGLE MODE FIBERS

G652.D
Belden Fiber CodeU12
Typical Mode Field Diameter @ 1310nm 9.2 ± 0.4 μm
Typical Mode Field Diameter @ 1550nm 10.4 ± 0.5 μm
Cladding Diameter125 ± 0.7 μm
 Clad Non-Circularity ≤ 0.7 %
Core-Clad Concentricity Error ≤ 0.5 μm 
Primary Coating Material Acrylate 
Primary Coating Diameter 245 ± 7 μm
Max. Attenuation @ 1310nm  0.36 dB/km 
Max. Attenuation @ 1550nm 0.22 dB/km 
Point Loss @ 1310nm & 1550nm0.05 dB 
Zero Dispersion Wavelength1302 – 1322 nm
Max. Slope @ Zero Dispersion Wavelength0.092 ps/(nm2·km)
Max. PMD @ Link Design Value0.1 ps/√km
Cable Cutoff Wavelength≤ 1260 nm
Refractive Index @1310nm1.467
Refractive Index @1550nm1.468
MULTI-MODE FIBERS62.5μm OM150μm OM250μm OM3
Belden Fiber CodeU62U50U53
Typical Core Diameter62.5 ± 2.5 μm50.0 ± 2.5 μm50.0 ± 2.5 μm
Cladding Diameter125 ± 1.0 μm125 ± 1.0 μm125 ± 1.0 μm
Clad Non-Circularity≤ 1 %≤ 1 %≤ 1 %
Core-Clad Concentricity Error≤ 1.0 μm≤ 1.0 μm≤ 1.0 μm
Primary Coating MaterialAcrylateAcrylateAcrylate
Primary Coating Diameter245 ± 10 μm245 ± 10 μm245 ± 10 μm
Max. Attenuation @ 850nm3.5 dB/km3.0 dB/km3.0 dB/km
Max. Attenuation @ 1300nm1.5 dB/km1.0 dB/km1.0 dB/km
Min. Overfilled Bandwidth @ 850nm200 MHz.km500 MHz.km1500 MHz.km
Min. Overfilled Bandwidth @ 1300nm500 MHz.km550 MHz.km500 MHz.km
Point Loss @ 850nm & 1300nm0.10 dB0.10 dB0.10 dB
Numerical Aperture0.275 ± 0.0150.200 ± 0.0150.200 ± 0.015
Refractive Index @ 850nm1.4971.4831.483
Refractive Index @ 1300nm1.4931.4791.479

 

LSZH Fiber Optic Cable – Single Mode & Multi Mode

Fiber Optic-Central Tube- Aramid Yarn – Armored/Single LSZH Jacket

Cable Characteristics-

DESCRIPTION:
2 to 48 optical fibers, Central gel filling loose tubes, Flexible non-metallic strength member – aramid yarn, CSTA armor, Single LSZH jacket (black).

PHYSICAL CHARACTERISTICS

 Fiber Type125/250 μm
Number of Fibers2 to 48
Fiber Color Code Chart: 
NumberColor
1Blue
2Orange
3Green
4Brown
5Grey
6White
7Red
8Black
9Yellow
10Violet
11Pink
12Aqua
Buffer Tube Diameter3.0 mm
Buffer Tube MaterialPBT – Polybutylene Terephthalate
Buffer Tube Filling MaterialSynthetic Thixotropic Gel

STRENGTH MEMBER:

 Strength Member MaterialAramid yarn

ARMORING:

 Armor TypeCorrugated
Armor MaterialSteel Tape
Armor Thickness0.15 mm

OUTER JACKET:

 Outer Jacket MaterialLSZH –Low Smoke Zero Halogen
Outer Jacket Nom. Wall Thickness1.1 mm
Outer Jacket ColorBlack

OVERALL DIAMETER:

 Overall Nominal Diameter7.3 mm

MECHNICAL CHARACTERISTICS

 Operating Temperature Range– 40℃ To + 70℃
Storage Temperature Range– 40℃ To + 70℃
Bulk Cable Weight40 kg/km
Max. Load for Installation1000 N, Passes IEC794-1
Max. Load for Long Term Application400 N, Passes IEC794-1
Min Bend Radius for Installation20 × Cable OD, Passes IEC794-1
Min Bend Radius for Long Term Application10 × Cable OD, Passes IEC794-1
Crush Resistance1000 N/100mm, Passes IEC794-1
Impact ResistancePasses IEC794-1
Solar Radiation ResistancePasses IEC794-1
Compound FlowPasses IEC794-1
Cyclic FlexingPasses IEC794-1

APPLICABLE SPECIFICATION AGENCY COMPLIANCE

APPLICABLE STANDARDS

 SpecificationIEC 60794-1, EIA/TIA-455,
EU RoHS Compliant (Y/N)Y
EU RoHS Compliance DateAug 2007

SUITABILITY

 Suitability – Indoor (Y/N)Y
Suitability – Outdoor (Y/N)Y (where waterproof is not strictly required.)
Suitability – Aerial (Y/N)Y
Suitability – Duct (Y/N)Y
Suitability – Direct Burial (Y/N)N
Sunlight Resistance (Y/N)Y

Optical Characteristics

SINGLE MODE FIBERS

 

G652.D
Belden Fiber CodeU12
Typical Mode Field Diameter @ 1310nm9.2 ± 0.4 μm
Typical Mode Field Diameter @ 1550nm10.4 ± 0.5 μm
Cladding Diameter125 ± 0.7 μm
 Clad Non-Circularity≤ 0.7 %
Core-Clad Concentricity Error≤ 0.5 μm
Primary Coating MaterialAcrylate
Primary Coating Diameter245 ± 5 μm
Secondary Color Coating Diameter250 ± 10 µm
Max. Attenuation @ 1310nm 0.36 dB/km
Max. Attenuation @ 1550nm0.22 dB/km
Point Loss @ 1310nm & 1550nm0.05 dB
Zero Dispersion Wavelength1302 – 1322 nm
Max. Slope @ Zero Dispersion Wavelength0.092 ps/(nm2·km)
Max. PMD @ Link Design Value0.1 ps/√km
Cable Cutoff Wavelength≤ 1260 nm
Refractive Index @1310nm1.466
Refractive Index @1550nm1.467
MULTI-MODE FIBERS62.5μm OM150μm OM250μm OM3
Belden Fiber CodeU62U50U53
Typical Core Diameter62.5 ± 2.5 μm50.0 ± 2.5 μm50.0 ± 2.5 μm
Cladding Diameter125 ± 1.0 μm125 ± 1.0 μm125 ± 1.0 μm
Clad Non-Circularity≤ 1 %≤ 1 %≤ 1 %
Core-Clad Concentricity Error≤ 1.5 μm≤ 1.5 μm≤ 1.0 μm
Primary Coating MaterialAcrylateAcrylateAcrylate
Primary Coating Diameter245 ± 7 μm245 ± 7 μm245 ± 7 μm
Secondary Color Coating Diameter250 ± 10 μm250 ± 10 μm250 ± 10 μm
Max. Attenuation @ 850nm3.5 dB/km3.0 dB/km3.0 dB/km
Max. Attenuation @ 1300nm1.0 dB/km1.0 dB/km1.0 dB/km
Min. Overfilled Bandwidth @ 850nm200 MHz.km500 MHz.km1500 MHz.km
Min. Overfilled Bandwidth @ 1300nm600 MHz.km500 MHz.km500 MHz.km
Point Loss @ 850nm & 1300nm0.10 dB0.10 dB0.10 dB
Numerical Aperture0.275 ± 0.0150.200 ± 0.0150.200 ± 0.015
Refractive Index @ 850nm1.4961.4821.482
Refractive Index @ 1300nm1.4911.4771.477
Min. G-Ethernet Transmission Distance@850nm300 m550 m1000 m
Min.G-Ethernet TransmissionDistance@1300nm550 m550 m600 m