Optical Fiber Cable

Home >> Optical Fiber Cable

Optical Fiber Cable Suppliers

Capitalizing on the ability of our skilled personnel, we are keenly instrumental in delivering a comprehensive array of Optical Fiber Cable Suppliers. It is manufactured using superior quality materials in accordance to the set industry norms. This cable is well known in the market due to its better reliability, thinner and sturdier. We are known as Optical Fiber Cable Suppliers. Moreover, Optical Fiber Cable can be bought from us at pocket friendly prices.

A Optical Fiber Cable, also known as an optical-fiber cable, is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light. The Optical Fiber Cables are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed.

Fiber Optic Cable Single Mode & Multi Mode

Fiber Optic – Central Tube – Glass Yarn/Steel Wire – Armored/Single PE Jacket

Cable Characteristics-

DESCRIPTION:
2 – 48 optical fibers, Central gel filling loose tubes, Flexible non-metallic strength member – glass yarn, two rip cords, CSTA armor, Two Steel Wires Embedded in Single PE jacket (black).
PHYSICAL CHARACTERISTICS
	Fiber Type	125/250 μm
	Number of Fibers	12
	Fiber Color Code Chart:
	Number	Color
	1	Blue
	2	Orange
	3	Green
	4	Brown
	5	Slate
	6	Natural
	Buffer Tube Material	PBT – Polybutylene Terephthalate
	Buffer Tube Filling Material	Synthetic Thixotropic Gel
STRENGTH MEMBER:
	Strength Member Material	Glass yarn, Two Steel Wire Embedded in Sheath
ARMORING:
	Armor Type	Corrugated
	Armor Material	Steel Tape
OUTER JACKET:
	Outer Jacket Material	PE – Polyethylene
	Outer Jacket Color	Black
OVERALL DIAMETER:
	Overall Nominal Diameter	8.7 mm
MECHNICAL CHARACTERISTICS
	Temperature Range	– 40℃ To + 70℃
	Bulk Cable Weight	85 kg/km
	Max. Tensile Force	2000 N
	Max. Crush Resistance for 60 seconds	1000 N/100mm, Passes IEC60794-1
	Min. Bend Radius	20 × Cable OD
APPLICABLE SPECIFICATION AGENCY COMPLIANCE
APPLICABLE STANDARDS
	Specification	IEC 60794-1,
	RoHS Compliant (Y/N)	Y (for outer jacket only)
SUITABILITY
	Suitability – Indoor (Y/N)	Y
	Suitability – Outdoor (Y/N)	Y (where waterproof is not strictly required.)
	Suitability – Aerial (Y/N)	Y
	Suitability – Duct (Y/N)	N
	Suitability – Direct Burial (Y/N)	N
	Sunlight Resistance (Y/N)	Y

Optical Characteristics

SINGLE MODE FIBERS	G652.D
Belden Fiber Code	U12
Typical Mode Field Diameter @ 1310nm	9.2 ± 0.4 μm
Typical Mode Field Diameter @ 1550nm	10.4 ± 0.5 μm
Cladding Diameter	125 ± 0.7 μm
Clad Non-Circularity	≤ 0.7 %
Core-Clad Concentricity Error	≤ 0.5 μm
Primary Coating Material	Acrylate
Primary Coating Diameter	245 ± 7 μm
Max. Attenuation @ 1310nm	0.36 dB/km
Max. Attenuation @ 1550nm	0.22 dB/km
Point Loss @ 1310nm & 1550nm	0.05 dB
Zero Dispersion Wavelength	1302 – 1322 nm
Max. Slope @ Zero Dispersion Wavelength	0.092 ps/(nm2·km)
Max. PMD @ Link Design Value	0.1 ps/√km
Cable Cutoff Wavelength	≤ 1260 nm
Refractive Index @1310nm	1.467
Refractive Index @1550nm	1.468

MULTI-MODE FIBERS	62.5μm OM1	50μm OM2	50μm OM3
Belden Fiber Code	U62	U50	U53
Typical Core Diameter	62.5 ± 2.5 μm	50.0 ± 2.5 μm	50.0 ± 2.5 μm
Cladding Diameter	125 ± 1.0 μm	125 ± 1.0 μm	125 ± 1.0 μm
Clad Non-Circularity	≤ 1 %	≤ 1 %	≤ 1 %
Core-Clad Concentricity Error	≤ 1.0 μm	≤ 1.0 μm	≤ 1.0 μm
Primary Coating Material	Acrylate	Acrylate	Acrylate
Primary Coating Diameter	245 ± 10 μm	245 ± 10 μm	245 ± 10 μm
Max. Attenuation @ 850nm	3.5 dB/km	3.0 dB/km	3.0 dB/km
Max. Attenuation @ 1300nm	1.5 dB/km	1.0 dB/km	1.0 dB/km
Min. Overfilled Bandwidth @ 850nm	200 MHz.km	500 MHz.km	1500 MHz.km
Min. Overfilled Bandwidth @ 1300nm	500 MHz.km	550 MHz.km	500 MHz.km
Point Loss @ 850nm & 1300nm	0.10 dB	0.10 dB	0.10 dB
Numerical Aperture	0.275 ± 0.015	0.200 ± 0.015	0.200 ± 0.015
Refractive Index @ 850nm	1.497	1.483	1.483
Refractive Index @ 1300nm	1.493	1.479	1.479

LSZH Fiber Optic Cable – Single Mode & Multi Mode

Fiber Optic-Central Tube- Aramid Yarn – Armored/Single LSZH Jacket

Cable Characteristics-

DESCRIPTION:
2 to 48 optical fibers, Central gel filling loose tubes, Flexible non-metallic strength member – aramid yarn, CSTA armor, Single LSZH jacket (black).
PHYSICAL CHARACTERISTICS
	Fiber Type	125/250 μm
	Number of Fibers	2 to 48
	Fiber Color Code Chart:
	Number	Color
	1	Blue
	2	Orange
	3	Green
	4	Brown
	5	Grey
	6	White
	7	Red
	8	Black
	9	Yellow
	10	Violet
	11	Pink
	12	Aqua
	Buffer Tube Diameter	3.0 mm
	Buffer Tube Material	PBT – Polybutylene Terephthalate
	Buffer Tube Filling Material	Synthetic Thixotropic Gel
STRENGTH MEMBER:
	Strength Member Material	Aramid yarn
ARMORING:
	Armor Type	Corrugated
	Armor Material	Steel Tape
	Armor Thickness	0.15 mm
OUTER JACKET:
	Outer Jacket Material	LSZH –Low Smoke Zero Halogen
	Outer Jacket Nom. Wall Thickness	1.1 mm
	Outer Jacket Color	Black
OVERALL DIAMETER:
	Overall Nominal Diameter	7.3 mm
MECHNICAL CHARACTERISTICS
	Operating Temperature Range	– 40℃ To + 70℃
	Storage Temperature Range	– 40℃ To + 70℃
	Bulk Cable Weight	40 kg/km
	Max. Load for Installation	1000 N, Passes IEC794-1
	Max. Load for Long Term Application	400 N, Passes IEC794-1
	Min Bend Radius for Installation	20 × Cable OD, Passes IEC794-1
	Min Bend Radius for Long Term Application	10 × Cable OD, Passes IEC794-1
	Crush Resistance	1000 N/100mm, Passes IEC794-1
	Impact Resistance	Passes IEC794-1
	Solar Radiation Resistance	Passes IEC794-1
	Compound Flow	Passes IEC794-1
	Cyclic Flexing	Passes IEC794-1
APPLICABLE SPECIFICATION AGENCY COMPLIANCE
APPLICABLE STANDARDS
	Specification	IEC 60794-1, EIA/TIA-455,
	EU RoHS Compliant (Y/N)	Y
	EU RoHS Compliance Date	Aug 2007
SUITABILITY
	Suitability – Indoor (Y/N)	Y
	Suitability – Outdoor (Y/N)	Y (where waterproof is not strictly required.)
	Suitability – Aerial (Y/N)	Y
	Suitability – Duct (Y/N)	Y
	Suitability – Direct Burial (Y/N)	N
	Sunlight Resistance (Y/N)	Y

Optical Characteristics

SINGLE MODE FIBERS	G652.D
Belden Fiber Code	U12
Typical Mode Field Diameter @ 1310nm	9.2 ± 0.4 μm
Typical Mode Field Diameter @ 1550nm	10.4 ± 0.5 μm
Cladding Diameter	125 ± 0.7 μm
Clad Non-Circularity	≤ 0.7 %
Core-Clad Concentricity Error	≤ 0.5 μm
Primary Coating Material	Acrylate
Primary Coating Diameter	245 ± 5 μm
Secondary Color Coating Diameter	250 ± 10 µm
Max. Attenuation @ 1310nm	0.36 dB/km
Max. Attenuation @ 1550nm	0.22 dB/km
Point Loss @ 1310nm & 1550nm	0.05 dB
Zero Dispersion Wavelength	1302 – 1322 nm
Max. Slope @ Zero Dispersion Wavelength	0.092 ps/(nm²·km)
Max. PMD @ Link Design Value	0.1 ps/√km
Cable Cutoff Wavelength	≤ 1260 nm
Refractive Index @1310nm	1.466
Refractive Index @1550nm	1.467

MULTI-MODE FIBERS	62.5μm OM1	50μm OM2	50μm OM3
Belden Fiber Code	U62	U50	U53
Typical Core Diameter	62.5 ± 2.5 μm	50.0 ± 2.5 μm	50.0 ± 2.5 μm
Cladding Diameter	125 ± 1.0 μm	125 ± 1.0 μm	125 ± 1.0 μm
Clad Non-Circularity	≤ 1 %	≤ 1 %	≤ 1 %
Core-Clad Concentricity Error	≤ 1.5 μm	≤ 1.5 μm	≤ 1.0 μm
Primary Coating Material	Acrylate	Acrylate	Acrylate
Primary Coating Diameter	245 ± 7 μm	245 ± 7 μm	245 ± 7 μm
Secondary Color Coating Diameter	250 ± 10 μm	250 ± 10 μm	250 ± 10 μm
Max. Attenuation @ 850nm	3.5 dB/km	3.0 dB/km	3.0 dB/km
Max. Attenuation @ 1300nm	1.0 dB/km	1.0 dB/km	1.0 dB/km
Min. Overfilled Bandwidth @ 850nm	200 MHz.km	500 MHz.km	1500 MHz.km
Min. Overfilled Bandwidth @ 1300nm	600 MHz.km	500 MHz.km	500 MHz.km
Point Loss @ 850nm & 1300nm	0.10 dB	0.10 dB	0.10 dB
Numerical Aperture	0.275 ± 0.015	0.200 ± 0.015	0.200 ± 0.015
Refractive Index @ 850nm	1.496	1.482	1.482
Refractive Index @ 1300nm	1.491	1.477	1.477
Min. G-Ethernet Transmission Distance@850nm	300 m	550 m	1000 m
Min.G-Ethernet TransmissionDistance@1300nm	550 m	550 m	600 m